LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Spindle Carrier >> Installation

Spindle Carrier: Installation

To install, reverse removal procedure. Verify that rotor is

installed according to index mark on rotor and hub.

NOTE: If cotter pin hole does not line up correctly after tightening nut to specification, tighten castle nut to next slot. DO NOT loosen nut to line up cotter pin hole.
scientia non olet · About LEMON Manuals