LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Overhaul - 4-CYL >> Seal Replacement >> Install Seal Seat

Install Seal Seat

  1. Coat ceramic seal seat with clean refrigerant oil. Insert ceramic seal seat installer into seal seat. Turn outer sleeve to grip seat.
    Fig 1: Install Seal Seat (1 of 2)
    G17561
  2. Install seal seat, while rotating tool in clockwise direction. This will prevent dislodging "O" ring from its groove. Remove seal seat installer and shaft protector.

Tool Reference - No. 10 - Ceramic Seal Seat Remover/Installer

Fig 2: Install Seal Seat (2 of 2)
G17562
scientia non olet · About LEMON Manuals