LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.3L 4-CYL Turbo - VIN [W] >> Overhaul >> Auxiliary Shaft & Seal >> Removal

Auxiliary Shaft & Seal: Removal

Remove accessory belts, timing belt cover and timing belt. Using Cam Sprocket Holding/Removing Tool (T74P-6256-B), remove auxiliary sprocket. Using Front Cover Seal Remover (T74P-6700-B), remove seal. Remove auxiliary shaft cover, gasket and thrust plate. Carefully remove shaft.

scientia non olet · About LEMON Manuals