Oil Pump: Installation
To install, reverse removal procedure and use new pick-up tube gasket. Oil pump must be free to rotate after installation.
OIL PUMP SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Outer Race-to-Housing | .001-.013 (.02-.33) | |
| Relief Valve Spring | ||
| Clearance | .0022 (.057) | |
| Tension | 16.2 lbs. (6.5 kg)@1.20 (30.4) | |
| Relief Valve Bore Clearance | .0022 (.057) | |
| Rotor Tip End Clearance | .010 (.254) | |
| Rotor Assembly End Clearance | .004 (.10) | |