Pistons, Pins & Rings Specifications
PISTONS, PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Piston Clearance | .0030-.0038 (.076-.097) | ||||
| Pins | |||||
| Piston Fit | .0003-.0005 (.007-.013) | ||||
| Rod Fit | Press Fit | ||||
| Rings | |||||
| Ring No. 1 & No. 2 | |||||
| End Gap | .010-.020 (.25-.50) | ||||
| Side Clearance | (1) .002-.004 (.05-.10) | ||||
| Ring No. 3 | |||||
| End Gap | .015-.055 (.38-1.39) | ||||
| Side Clearance | Snug Fit | ||||
|
|||||