LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.3L 4-CYL Turbo - VIN [W] >> Engine Cooling >> Water Pump >> Installation

Water Pump: Installation

Clean all gasket surfaces. Reverse removal to complete installation. Fill, bleed and check system for leaks.

NOTE: For further information on cooling system capacities and other cooling system components, refer to the COOLING SYSTEM SPECIFICATIONS article in this section.
scientia non olet · About LEMON Manuals