LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Removal & Installation >> Drive Pinion Flange & Pinion Seal >> Removal

Drive Pinion Flange & Pinion Seal: Removal

Remove drive shaft. Hold drive pinion flange with Flange Holder (T78P-4851-A) and remove nut. Remove drive pinion flange using Puller (D80L-1002-L). Remove pinion seal using pry bar or screwdriver.

CAUTION: Remove pinion seal carefully to prevent damage to seal bore in aluminum case.
scientia non olet · About LEMON Manuals