LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Overhaul - C-3 >> Transmission Disassembly >> Rear Servo, Valve Body & Oil Pump

Rear Servo, Valve Body & Oil Pump

  1. Pull torque converter straight out of transmission. Remove input shaft. Remove oil pan and gasket. Remove oil filter and gasket. Ensure all attaching bolts are kept with their respective components for reassembly reference.
  2. Remove manual lever detent spring attaching bolt and detent spring. Remove reverse servo cover and gasket. Remove reverse servo piston. Remove valve body attaching bolts and valve body. Disconnect selector lever "Z" link from manual valve. Remove converter housing attaching bolts. Remove converter housing and pump assembly.
scientia non olet · About LEMON Manuals