LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Automatic >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

To install, reverse removal procedure. Before installing bearings, pack them thoroughly using Lubricant (C1AZ-1959D-B, C, D or E). Do not pack grease into space between bearings.

NOTE: When tightening spindle bearing lock nut, observe tightening specification. Over or under tightening of bearing can cause premature bearing failure. Ensure torque wrench is properly calibrated.
scientia non olet · About LEMON Manuals