LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1986 >> XR4Ti Automatic >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Overhaul - 4-CYL >> Seal Replacement >> Install Pulley Nut

Install Pulley Nut

Apply thread locking compound to threads of pulley and field coil retaining nut. Using pulley spanner wrench, install and tighten nut. Using pulley spanner wrench, install and tighten nut to 65-70 ft. lbs.

Tool Reference - No. 4 - Pulley Spanner Wrench

Fig 1: Install Pulley Nut
G17566
scientia non olet · About LEMON Manuals