LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels & Tires >> Removal And Installation >> Wheel and Tire >> Removal

Wheel and Tire: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. NOTE: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can occur.

    Remove the 5 wheel nuts.

  3. Remove the wheel and tire assembly.
scientia non olet · About LEMON Manuals