LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Climate Control System >> Removal And Installation >> Heating Ventilation Air Conditioning (HVAC) Module - MKZ >> Removal and Installation

Removal and Installation

  1. Remove the Front Display Interface Module (FDIM). For additional information, refer to REMOVAL AND INSTALLATION (Fusion, Milan) and REMOVAL AND INSTALLATION (MKZ) .
  2. Remove the 2 HVAC module screws.
  3. Disconnect the 2 HVAC module electrical connectors.
  4. Remove the HVAC module.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals