LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (HVAC - Climate Control System - General Information And Diagnostics (Hybrid)) >> Specifications >> General Specifications Table

General Specifications Table

WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS TABLE

Item Specification
A/C Compressor Oil 
NOTE: Use of any Air Conditioning (A/C) compressor oil other than what is specified for the specific vehicle configuration will damage the A/C compressor and contaminate the refrigerant system. For non-hybrid vehicles with a pulley driven (conventional) A/C compressor, PAG Refrigerant Compressor Oil only must be used. For hybrid vehicles with an electric A/C compressor, Motorcraft® Electric A/C Compressor Oil must be used.
A/C Pressure Relief Valve (1)
Close pressure 3,103 kPa (450 psi)
Open pressure 3,792-4,137 kPa (550-600 psi)
(1) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.
NOTE: The specifications apply to hybrid vehicles only. For non-hybrid specifications, refer to CLIMATE CONTROL SYSTEM .
scientia non olet · About LEMON Manuals