LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transaxle - 6F35) >> Diagnosis And Testing >> Preliminary Inspection >> Verification of Condition >> High Transmission Fluid Level

High Transmission Fluid Level

WARNING: This page is about a different variant/trim than selected.

A transmission fluid level that is too high may cause the transmission fluid to become aerated due to the churning action of the rotating internal parts. This will cause erratic control pressure, foaming, loss of transmission fluid from the vent tube and possible transaxle malfunction and/or damage. If an overfill reading is indicated, refer to TRANSMISSION FLUID DRAIN AND REFILL .