Electrical Operation
WARNING: This page is about a different variant/trim than selected.
Solenoid operation:
Reverse Position Solenoid Operation Chart
REVERSE POSITION SOLENOID OPERATION CHART
| Base Selector Lever Position | PCM Commanded Gear | Shift Solenoid | TCC (VFS) NL | ||||
|---|---|---|---|---|---|---|---|
| SSA (VFS) NL (1, 2, 3, 4) | SSB (VFS) NH (3, 5, R) | SSC (VFS) NL (2, 6) | SSD (VFS) NH (L, R/4, 5, 6) | SSE (On/Off) NC | |||
| R | R | Off | Off | Off | Off | On | Off |
NC = Normally closed
NH = Normally high
NL = Normally low