LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transaxle - 6F35) >> Description And Operation >> Transaxle Electronic Control System >> Brake Pedal Position (BPP) Switch

Brake Pedal Position (BPP) Switch

WARNING: This page is about a different variant/trim than selected.

The Brake Pedal Position (BPP) switch tells the PCM when the brakes are applied. The BPP switch closes when the brakes are applied and opens when they are released. The BPP signal is used for the brake shift interlock actuation.

scientia non olet · About LEMON Manuals