LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle - AISIN Aw21) >> In-Vehicle Repair >> Differential Seals - RH, All Wheel Drive (AWD) >> Removal

Differential Seals - RH, All Wheel Drive (AWD): Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage.
  1. Remove the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) .
  2. Using the Input Shaft Oil Seal Remover and Slide Hammer, remove the differential fluid seals.
    NOTE: Transaxle removed for clarity.
    Fig 1: Removing Differential Fluid Seals
    G06263996Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals