Component testing procedure

WARNING: This page is about a different variant/trim than selected.

POWER SEAT SWITCH, 6-WAY POWER SEAT - COMPONENT TESTING TABLE

Circuit to test	Connect self powered test light or ohmmeter to terminals	Move switch to these positions	A good switch will indicate
Forward/Rearward circuit	4 and 3 6 and 2	Forward	Closed circuit
	4 and 3 6 and 2	Forward	Closed circuit
	4 and 6 3 and 2	Rearward	Closed circuit
	4 and 6 3 and 2	Rearward	Closed circuit
Front up/down circuit	4 and 7 5 and 2	Up	Closed circuit
	4 and 7 5 and 2	Up	Closed circuit
	4 and 5 7 and 2	Down	Closed circuit
	4 and 5 7 and 2	Down	Closed circuit
Rear up/down circuit	4 and 8 1 and 2	Up	Closed circuit
	4 and 8 1 and 2	Up	Closed circuit
	1 and 4 8 and 2	Down	Closed circuit
	1 and 4 8 and 2	Down	Closed circuit