LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.5L (Hybrid)) >> Assembly >> Engine >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS TABLE

G06096787Courtesy of FORD MOTOR CO.
 Aligner, Crankshaft Sensor 303-1417
G06094842Courtesy of FORD MOTOR CO.
 Alignment Plate, Camshaft 303-465 (T94P-6256-CH)
G06095238Courtesy of FORD MOTOR CO.
 Compressor, Piston Ring 303-D032 (D81L-6002-C)
G06064974Courtesy of FORD MOTOR CO.
 Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
G06062108Courtesy of FORD MOTOR CO.
 Heavy Duty Floor Crane 014-00071 or equivalent
G06094843Courtesy of FORD MOTOR CO.
 Holding Tool, Crankshaft Damper 303-1416
G06094865Courtesy of FORD MOTOR CO.
 Installer, Camshaft Front Oil Seal 303-096 (T74P-6150-A)
G06181716Courtesy of FORD MOTOR CO.
 Installer, Connecting Rod 303-462 (T94P-6136-AH)
G06094872Courtesy of FORD MOTOR CO.
 Installer, Crankshaft Rear Main Oil Seal 303-328 (T88P-6701-B1)
G06062110Courtesy of FORD MOTOR CO.
 Spreader Bar 303-D089 (D93P-6001-A3) or equivalent
G06181547Courtesy of FORD MOTOR CO.
 Timing Peg, Crankshaft TDC  303-507
scientia non olet · About LEMON Manuals