LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Anti-Theft System - Passive Anti-Theft System (Pats) (Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the 3 screws and the lower steering column shroud.
  2. Disconnect the electrical connector.
  3. Using a suitable tool such as a dentist pick, pull the tangs outward and remove the Passive Anti-Theft System (PATS) transceiver.
  4. To install, reverse the removal procedure.
    NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Panel Cluster (IPC) again.
scientia non olet · About LEMON Manuals