LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Automatic Transaxle Cooling - AISIN Aw21/6F35 (Except Hybrid)) >> Diagnosis And Testing >> Transaxle Cooling - Aisin AW21 >> Symptom Table - NVH >> Adding Transmission Fluid

Adding Transmission Fluid

WARNING: This page is about a different variant/trim than selected.
NOTE: The use of any fluid other than what is recommended for this transaxle will cause transaxle damage.

If transmission fluid needs to be added, add transmission fluid in 0.25L (1/2 pt) increments through the indicator tube. Do not overfill the transaxle. For transmission fluid type, refer to Material  .

scientia non olet · About LEMON Manuals