Symptom Table - Transaxle Cooling
WARNING: This page is about a different variant/trim than selected.
SYMPTOM TABLE - TRANSAXLE COOLING
| Condition |
Possible Sources |
Action |
- Motor Electronics Cooling System (MECS) overheating
|
- Clogged MECS
radiator or hoses
|
- INSPECT the MECS
radiator and hoses for damage or plugging.
|
| - |
- Kinked MECS
hoses
- MECS
leaks
|
- INSTALL a new MECS
radiator or hoses as necessary.
- INSPECT the MECS
radiator and hoses for leaks. REPAIR or INSTALL new components as necessary.
|
| - |
- MECS
pump does not operate
- Air in cooling system
|
- CHECK the MECS
pump electrical system. Go to PINPOINT TEST A .
- Loosen the MECS
bleed screw located on the DC/DC converter to bleed any air from the cooling system.
|
| - |
- Radiator cooling fans
- Internal transaxle concerns
|
|