LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle Cooling (ECVT) (Hybrid)) >> Diagnosis And Testing >> Transaxle Cooling >> Pinpoint Tests >> Pinpoint Test A: MECS Cooling Pump Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different variant/trim than selected.

The Motor Electronics Cooling System (MECS) pump is electrically driven and controlled by the PCM through the MECS  pump relay. The PCM energizes the MECS  pump relay by pulling the MECS  pump output to ground when the ignition is in the ON position.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals