LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Accessory Drive System - 2.5L (Hybrid)) >> Diagnosis And Testing >> Accessory Drive >> Symptom Table

Symptom Table

WARNING: This page is about a different variant/trim than selected.
SYMPTOM TABLE

Condition Possible Sources Action
  • Accessory drive belt cracking (over 15 cracks in a rib over a distance of 100 mm [4.0 in])
  • Accessory drive belt
  • Accessory drive belt chunking
  • Accessory drive belt
-
  • Damaged pulley grooves
  • INSPECT the accessory drive belt pulley grooves for damage. INSTALL a new pulley or component as necessary.
  • Accessory drive belt noise, squeal, chirping or flutter
  • Defective/worn or incorrect accessory drive belt
  • Misaligned pulley(s)
  • Pulley runout
  • Damaged or worn accessory drive component or idler
  • Fluid contamination of accessory drive belt or pulleys
-
  • Damaged or worn accessory drive belt tensioner
-
  • Damaged pulley grooves
  • INSPECT the accessory drive belt pulley grooves for damage. INSTALL a new pulley or component as necessary.
-
  • Accessory drive component failure
  • CHECK the accessory drive components. INSTALL new components as necessary.
-
  • Accessory drive belt idler pulley bearing failure
  • INSPECT the accessory drive belt idler pulley for freedom of rotation and damage. INSTALL a new accessory drive belt idler pulley as necessary.
  • Premature accessory drive belt wear
  • Defective or incorrect accessory drive belt
  • Misaligned pulley(s)
  • Pulley runout
  • Damaged accessories
  • Incorrectly installed drive belt
  • Fluid contamination
-
  • Damaged pulley grooves
  • INSPECT the accessory drive belt pulley grooves for damage. INSTALL a new pulley or component as necessary.