LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the Valve Stem Oil Seal Installer, install the valve stem seal.
    Fig 1: Installing Valve Stem Seal
    G06263654Courtesy of FORD MOTOR CO.
  2. Install the valve.
  3. Using the Valve Spring Compressors, install the valve spring, retainer and keys.
    Fig 2: Installing Keys, Retainer & Spring
    G06095806Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals