LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Fuel Charging System & Fuel Control System - 3.0L (4V)) >> Removal And Installation >> Fuel Rail and Fuel Injector - Exploded View >> Fuel Injector

Fuel Injector

WARNING: This page is about a different variant/trim than selected.
NOTE: Early build shown in illustration, late build similar.
Fig 1: Identifying Fuel Injector Replacement Components
G06096634Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 - Fuel rail Schrader valve (part of 9F792) (early build only)
2 9F792 Fuel rail
3 9229 Upper fuel injector O-ring seal (6 required)
4 9F593 Fuel injector (6 required)
5 - Fuel injector electrical connector (part of 14B485) (6 required)
6 9C995 Fuel injector clip (6 required)
7 9229 Lower fuel injector seal (6 required)
  1. For additional information, refer to the appropriate procedure(s).