LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Fuel Charging System & Fuel Control System - 3.0L (4V)) >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position aside the LR quarter panel luggage compartment trim.
  2. Disconnect the Fuel Pump (FP) control module electrical connector.
  3. Remove the 2 pin-type retainers and the FP  control module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals