LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transaxle External Controls (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Slide the selector lever knob bezel downward to gain access to the 2 selector lever knob screws.
    Fig 1: Sliding Selector Lever Knob Bezel Downward
    G06275790Courtesy of FORD MOTOR CO.
  2. Remove the 2 screws from the selector lever knob. Remove the selector lever knob and the selector lever knob bezel.
    Fig 2: Identifying Selector Lever Knob & Selector Lever Knob Bezel
    G06275791Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals