LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transaxle External Controls (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Installation

Selector Lever Knob: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the selector lever knob on the selector lever and install the screws.
    Fig 1: Identifying Selector Lever Knob & Selector Lever Knob Bezel
    G06275791Courtesy of FORD MOTOR CO.
  2. Slide the selector lever knob bezel up and install it on the selector lever knob.
    Fig 2: Sliding Selector Lever Knob Bezel Up
    G06275793Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals