Selector Lever Bezel: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the selector lever trim ring.

Fig 1: Locating Selector Lever Trim Ring
Courtesy of FORD MOTOR CO.
Remove the center console trim panel.

Fig 2: Center Console Trim Panel
Courtesy of FORD MOTOR CO.
Remove the utility tray from the center console.

Fig 3: Identifying Utility Tray
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the utility tray.

Fig 4: Locating Electrical Connector
Courtesy of FORD MOTOR CO.
Slide the selector lever knob bezel downward to gain access to the 2 selector lever knob screws.

Fig 5: Sliding Selector Lever Knob Bezel Downward
Courtesy of FORD MOTOR CO.
Remove the 2 screws from the selector lever knob. Remove the selector lever knob and the selector lever knob bezel.

Fig 6: Identifying Selector Lever Knob & Selector Lever Knob Bezel
Courtesy of FORD MOTOR CO.
Disconnect the selector lever bezel electrical connector.

Fig 7: Locating Selector Lever Bezel Electrical Connector
Courtesy of FORD MOTOR CO.
Release the 3 tabs and remove the selector lever knob bezel.
NOTE: Selector lever removed for clarity.

Fig 8: Locating Selector Lever Knob Bezel With Tabs
Courtesy of FORD MOTOR CO.