Selector Lever Bezel: Installation

WARNING: This page is about a different variant/trim than selected.

Install the selector lever bezel on the selector lever.
- Position the override lever in the override lever guide.
- Make sure that the 3 locking tabs are locked in place.
NOTE: Be sure that the override lever is inserted in the override lever guide or the shift interlock override button will not work correctly.

NOTE: Selector lever removed for clarity.

Fig 1: Identifying Selector Lever Bezel On Selector Lever
Courtesy of FORD MOTOR CO.
Connect selector lever bezel electrical connector.

Fig 2: Locating Selector Lever Bezel Electrical Connector
Courtesy of FORD MOTOR CO.
Install the selector lever knob on the selector lever and install the screws.

Fig 3: Identifying Selector Lever Knob & Selector Lever Knob Bezel
Courtesy of FORD MOTOR CO.
Slide the selector lever knob bezel up and install it on the selector lever knob.

Fig 4: Sliding Selector Lever Knob Bezel Up
Courtesy of FORD MOTOR CO.
Position the utility tray in place and connect the electrical connector.

Fig 5: Locating Electrical Connector
Courtesy of FORD MOTOR CO.
Install the utility tray on the center console.

Fig 6: Locating Utility Tray On Center Console
Courtesy of FORD MOTOR CO.
Install the center console trim panel.

Fig 7: Locating Center Console Trim Panel
Courtesy of FORD MOTOR CO.
Install the selector lever trim ring.

Fig 8: Locating Selector Lever Trim Ring
Courtesy of FORD MOTOR CO.