LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the 10 bolts and the differential housing cover.
    • Drain the differential fluid from the housing.
Fig 1: Locating Differential Housing Cover Bolt
G06269552Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals