LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 928 (Exterior Lighting System) >> Removal And Installation >> Light Sensor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sensor from the instrument panel.
    • Disconnect the electrical connector.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals