LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 898 (Climate Control) >> Removal And Installation >> Air Conditioning (A/C) Cycling Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the A/C cycling switch electrical connector.
  2. Remove the A/C cycling switch.
    • Discard the O-ring seal.
    • To install, tighten to 3 Nm (27 lb-in).
  3. To install, reverse the removal procedure.
    • Install a new O-ring seal.
scientia non olet · About LEMON Manuals