LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 870 (Brake System - General Information) >> Diagnostic Tests >> Brake System - Hybrid >> Pinpoint Tests >> Pinpoint Test C: DTCs C1311, C1313, C1315, C1317 And C1440 - Brake Hydraulic Pressure Transducer Signal Fault(s) >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The ABS module internally monitors the hydraulic control unit (HCU) internal pressure and the hydraulic brake pressure to each wheel. If the pressure drops below acceptable limits, the ABS module sets a DTC and the red brake warning indicator and ABS light illuminate.

Possible Causes

scientia non olet · About LEMON Manuals