LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Safety Belt System - F250-F550) >> Removal And Installation >> Safety Belt Buckle - Rear, Crew Cab >> Removal And Installation >> Left side safety belt buckle assembly

Left side safety belt buckle assembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 bolts and the safety belt buckle assembly.
    • To install, tighten to 40 Nm (30 lb-ft).
    Fig 1: Locating Safety Belt Buckle Assembly Bolt
    GF0005420Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals