Rear Window Operation From the LH or RH Rear Window Control Switch
When the LH rear window is operated DOWN from the LH rear window control switch, power is sent to the LH rear window motor through circuit 885 (YE/LB) and ground through circuit 884 (YE/BK). When the RH rear window is operated DOWN from the RH rear window control switch, power is sent to the RH rear window motor through circuit through circuit 882 (BN/YE) and ground through circuit 881 (BN).
When the LH rear window is operated UP from the LH rear window control switch, power is sent to the LH rear window motor through circuit 316 (YE/LB) and ground through 317 (GY/OG). When the RH rear window is operated UP from the RH rear window control switch, power is sent to the RH rear window motor through circuit 881 (BN) and ground through circuit 882 (BN/YE).
Possible Causes
- LH front window control switch
- Rear door window motor
- LH or RH rear window control switch
- Open in circuits 193 (YE/LG), 316 (YE/LB), 317 (GY/OG), 319 (YE/BK), 320 (RD/BK), 881 (BN), 882 (BN/YE), 884 (YE/BK) or 885 (YE/LB)