LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Rear Door Trim Panel - SuperCab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door window garnish moulding. For additional information, refer to MOULDING - WINDOW GARNISH, REAR DOOR, SUPERCAB  in this article.
  2. Remove the screws and the scrivets.
    Fig 1: Removing Rear Door Trim Panel Screws And Scrivets - SuperCab
    G03925248Courtesy of FORD MOTOR CO.
  3. CAUTION: Do not pull directly outward on rear door trim panel, as damage will occur.
  4. Pull straight up to remove the rear door trim panel.
  5. CAUTION: Insert the lower panel tabs first or they can break when installing the rear door trim panel.
  6. To install, reverse the removal procedure.