LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Seat System - F-150 & Mark LT) >> Disassembly And Assembly >> Seat Cushion - Rear >> Disassembly And Assembly >> All seats

All seats

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. For additional information, refer to Seat - Rear  in this article.
  2. Remove the 4 rear seat lower anchors and tethers for children (LATCH) bolts and LATCH.
    • To install, tighten to 6 Nm (53 lb-in).
  3. Remove the 60/40 retention clip.
  4. Remove the center support riser.


  1. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals