Normal Operation
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Once the operator selects a gear position, the detents in the shift lever and transfer case should maintain the selection. If the transfer case does not stay in the selected position, systematically check the shift linkage and internal components of the transfer case.
Possible Causes
- Shift lever detent
- Mode indication switch
- Shift lever
- Integrated wheel ends (IWE) vent line(s)
- Transfer case shift lever/linkage
- Transfer case