Vehicles with 38.1 mm (1.5 in) stack height inner pinion bearing
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Install the special tools.
NOTE:
The special tools must be used with the new pinion bearings to be used.
NOTE:
Install new drive pinion bearings without any additional lubricant since the anti-rust oil provides adequate lubricant without upsetting the drive pinion bearing preload settings.
| Item | Part Number | Description |
|---|---|---|
| 1 | 4621 | Pinion Bearing (Outer) |
| 2 | 205-160 | Adapter for 205-S156 (T80T-4020-F43) |
| 3 | 4630 | Pinion Bearing (Inner) |
| 4 | 205-227 | Depth Gauge/Aligner, Drive Pinion (T85T-4020-AH2) |
| 5 | 205-159 | Adapter for 205-S156 (T80T-4020-F42) |
| 6 | 205-D038 | Gauge Tube (D81T-4020-F51) |
| 7 | 205-226 | Depth Gauge/Aligner, Drive Pinion (T85T-4020-AH1) |
| 8 | 4010 | Rear Axle Housing |
| 9 | 205-111 | Adapter for 205-S127 (T76P-4020-A11) |