LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Sunroof) >> Diagnosis And Testing >> Roof Opening Panel >> Pinpoint Tests >> Pinpoint Test E: The Roof Opening Panel Does Not Open or Close >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The roof opening panel module receives voltage on circuit 1173 (BN/OG) when the ignition switch is in the ACC or ON position. The roof opening panel module is grounded through circuit (BK). When the roof opening panel switch is pressed, circuit (BK) and circuit (WH) are connected for open/tilt down or circuit (BK) and circuit (VT) are connected for close/tilt up. The roof opening panel module controls the roof opening panel motor by directing power and ground on circuit (OG) and circuit (RD) to the motor.