LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1265 (HVAC - Climate Control System) >> Removal And Installation >> Evaporator Outlet Line - 2.5L, 3.0L (4V) >> Material

Evaporator Outlet Line - 2.5L, 3.0L (4V): Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Evaporator Outlet Line Replacement Components -- 2.5L, 3.0L (4V) With Torque Specifications
G06098796Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION CHART

Item Part Number Description
1 W520413 A/C compressor suction fitting nut
2 W520413 Thermostatic Expansion Valve (TXV) fitting nut
3 19867 Evaporator outlet line
4 19B596 O-ring seal and gasket seal kit
5 19B596 TXV  fitting gasket seal kit (2 pieces from kit required)