LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1227 (Seat System - Seats) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test B: The Power Seat Does Not Move Horizontally/Vertically >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The driver seat control switch is supplied voltage on circuit SBB19 (BU/RD) and ground on circuit GD182 (BK/GY). When pressed, the seat control switch supplies voltage and ground to horizontal motor circuits CPS23 (GN/VT) and CPS28 (GN), front height motor circuits CPS24 (GY) and CPS25 (WH/VT) or rear height motor circuits CPS26 (YE/BU) and CPS27 (BU/BN).

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals