LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1216 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AJ: The REGEN BRAKING DISABLED Message Is Inoperative/Always On (Hybrid) >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The Instrument Cluster (IC) receives the regenerative brake disabled status from the PCM over the High Speed Controller Area Network (HS-CAN) communication bus. If the regenerative braking system is disabled, the PCM sends a command to the IC  to display the regenerative braking disabled message.

If the regenerative braking message is missing, the IC  sets DTC U0100 in continuous memory and the regenerative braking disabled message remains in the last indication mode (on or off). If the regen braking message is deemed invalid by the IC  , the IC  defaults the regenerative braking disabled message off.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals