LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1194 (Wheels & Tires) >> Diagnosis And Testing >> Tire Pressure Monitoring System >> Ambient Temperature Change and Tire Pressure >> Tire Pressure Monitoring System (TPMS) Indicator Flashes

Tire Pressure Monitoring System (TPMS) Indicator Flashes

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The TPMS  indicator flashes for 70 seconds, then remains ON solid when the ignition switch is turned to the ON position, for the following conditions:

  1. Tire Pressure Sensor Fault - If equipped, the message center will display TIRE PRESSURE SENSOR FAULT when a tire pressure sensor is malfunctioning. GO to SYMPTOM CHART .
  2. No communication with the SJB  (TPMS  is integral to the SJB  ) - The TPMS  indicator is illuminated when the IC  has not received any signals from the SJB  for more than 5 seconds. If equipped, the message center displays TIRE PRESSURE MONITOR FAULT. GO to SYMPTOM CHART .
  3. Tire Pressure Monitor Fault - If equipped, the message center will display TIRE PRESSURE MONITOR FAULT when the TPMS  is malfunctioning or communication with the IC  has been lost. GO to SYMPTOM CHART .
scientia non olet · About LEMON Manuals