LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1141 (Climate Control) >> Removal And Installation >> Blower Motor Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to Climate Control Assembly .
  2. Remove the blower motor switch knob.
  3. Remove the blower motor switch.
    1. Remove the screw.
    2. Remove the blower motor switch.
    4. Fig 1: Blower Motor Switch & Screw
    GF0012693Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals