LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Pinpoint Tests >> Pinpoint test R: The Low Oil Pressure Warning Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The instrument cluster (IC) provides a reference voltage to the oil pressure switch on circuit 31 (WH/RD) (gasoline) or circuit 1308 (BN/OG) (diesel). When the oil pressure is within normal ranges, the engine oil pressure switch closes to ground pulling the reference voltage low to the instrument cluster (IC). The instrument cluster (IC), upon receipt of the ground signal, commands the low oil pressure warning indicator off. When the oil pressure is low, the engine oil pressure switch opens, removing the ground, and the instrument cluster (IC) commands the low oil pressure warning indicator on.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals