LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Pinpoint Tests >> Pinpoint Test Z: The Tow Haul Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The tow haul function is controlled by the tow haul switch located on the shifter assembly. The tow haul status is transmitted to the instrument cluster (IC) from the PCM over the high speed controller area network (HS-CAN).

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals