LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Instrument Cluster (Ic), Message Center, And Warning Chimes) >> Diagnostic Tests >> Instrument Cluster (IC) and Warning Chimes >> Pinpoint Tests >> Pinpoint Test M: The High Beam Indicator Is Never On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

When the multifunction switch is placed in the high beam position, voltage is supplied to the instrument cluster (IC) from the central junction box (CJB) through circuit 12 (LG/BK). The instrument cluster (IC) upon receipt of the voltage signal, illuminates the high beam indicator.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals